CAD (0)
▾
- All CategoriesAll Categories
- No-Hub Fitting RestraintsNo-Hub Fitting Restraints
- HOLDRITE #117-W Series- Wye or Sanitary Tee Fitting RestraintsHOLDRITE #117-W Series- Wye or Sanitary Tee Fitting Restraints
- Item # 117-6X3W
Item # 117-6X3W, 6X3" NoHub Wye or San Tee Restraint
117-6X3W6X3" NoHub Wye or San Tee Restraint
DOWNLOADS
- Revit Family Download
- HoldRite-CADmep-2021-05-10
- HoldRite-117-No-Hub-Fitting-Restraints-Product-Catalog
- APP-DRAWING-50-005570-000_117-W_Series_RevB
- APP-DRAWING-50-005613-000_117-W_Large_and_W-G_Series_RevA
- APP-DRAWING-50-005614-000_117-10X4W_and_10x6W-WG_Series_RevB
- SPEC-SHEET-spec_117-3W_thru_8W_RevC
- SPEC-SHEET-spec_117-10X4W_and_10X6W_-RevB
- SPEC-SHEET-spec_117-W_Series_10W_12W_-_15W_RevB
The HOLDRITE® #117-W Series No-Hub Fitting Restraints are designed to reinforce no-hub cast iron installations in accordance with the installation instructions of U.S. cast iron soil pipe manufacturers, CISPI Designation 301-18, 310-18, and the 2006 CISPI Installation Handbook. The #117-W (2” – 8”) retains the Wye fitting onto the adjoining piping, in mid-span runs. All stainless steel bands must be tightened to 60 in/lbs minimum. When installed correctly, these restraint brackets achieve a safe thrust pressure rating equal to 50' head of water pressure. For sizes 10”-15”, heavy duty steel pipe clamps and straps are used and require 60 ft/lbs of torque on pipe clamp bolts
Unit of Measure
Size |
N/A 6x3 |
Strap Material |
N/A 24GA, CRS, Galvanized Steel |
Bands Material |
N/A Stainless steel body, band & screw |
N/A
|
N/A While these restraint kits aid in compliance with the 2006 CISPI Handbook, they are not intended to suggest that no-hub pipe and fittings should be subjected to pressures in excess of the pipe manufacturers' recommendations. |