CAD (0)
▾
- All CategoriesAll Categories
- No-Hub Fitting RestraintsNo-Hub Fitting Restraints
- HOLDRITE #117-T Series- Test/Cleanout Tee Fitting RestraintsHOLDRITE #117-T Series- Test/Cleanout Tee Fitting Restraints
- Item # 117-10T
Item # 117-10T, T Series- Test/Cleanout Tee Fitting Restraints
117-10TT Series- Test/Cleanout Tee Fitting Restraints
The HOLDRITE® #117-T Series No-Hub Fitting Restraints are designed to reinforce no-hub cast iron installations of Test/Cleanout Tees, in accordance with the installation instructions of U.S. cast iron soil pipe manufacturers, CISPI Designation 301-18, 310-18, and the 2006 CISPI Installation Handbook. The #117-T (2" – 8” in size) retain the reducer fittings onto the adjoining piping using stainless steel bands which must be torqued to 60 in/lbs minimum. When installed correctly, these restraint brackets achieve a safe thrust pressure rating equal to 50' head of water pressure. For the 10” size, heavy duty steel pipes clamp and straps are used and require 60 ft/lbs of torque on pipe clamp bolts
Unit of Measure
Size |
N/A 10 |
Strap Material |
N/A 16GA, CRS, Galvanized Steel |
Clamp Material |
N/A Heavy Duty Black or Galvanized Steel Pipe Clamp |
Hardware Material |
N/A Standard |
N/A
|
N/A While these restraint kits aid in compliance with the 2006 CISPI Handbook, they are not intended to suggest that no-hub pipe and fittings should be subjected to pressures in excess of the pipe manufacturers' recommendations. |