CAD (0)
  • Cart is empty
  • Telescoping-Sleeves

    • Ideal for flat concrete form decks – cast-in-place
    • Ideal for corrugated metal decks (corrugated deck plate required)
    • Available for 1/2” to 6” penetrants – piping, conduit, cables, etc.
    • For insulated and non-insulated pipes
    • Telescoping design adjusts from 7-1/2” – 11-3/4”, in 1/4” increments
    • Cut to as short as 2-1/2”
    • Black base and black whiskers identifies metal piping system
    • Red base and red whiskers identifies plastic or metal piping system
    • Includes locator whiskers, to locate buried sleeves and to identify pipe type (metal or plastic)
    • Dimensions on sleeves allows for simple height adjustments
    • Safety caps meet OSHA hole cover requirements
    • UL Listed firestop devices (2 or 3 hour F-ratings)
    • Meets and/or exceeds building code requirements
    • Built in fire, smoke, gas and water protection
    • UL W-Rated seal, water-tight for most penetrants
    • Allows for contraction, expansion, movement and off-center pipes
    • Reduces piping system noise transfer by maintaining annular spacing
    • Interlocking base capability assists with layout alignment
    • Extensions available for slabs over 12”
    • A variety of accessories are available
    • UL 50 Pa Ratings

  • Sleeves-w-Adjustable-Cap

    • Ideal for flat concrete form decks – cast-in-place
    • Ideal for corrugated metal decks (corrugated deck plate required)
    • Available for 1/2” to 6” penetrants, piping, conduits, cables, etc.
    • For insulated and non-insulated pipes
    • 7-1/4” – 8” Tall with adjustable cap and can be cut to as short as 3-1/2”. Extensions available
    • Black base and black whiskers identifies metal piping system
    • Red base and red whiskers identifies plastic or metal piping system
    • Includes locator whiskers, to locate buried sleeves and to identify pipe type (metal or plastic)
    • Dimensions on sleeve allows for simple height adjustment when cutting
    • Safety caps meet OSHA hole cover requirements
    • UL Listed firestop devices (2 or 3 hour F-ratings)
    • Meets and/or exceeds building code requirements
    • Built in fire, smoke, gas and water protection
    • UL W-Rated seal, water-tight for most penetrants
    • Allows for contraction, expansion, movement and off-center pipes
    • Reduces piping system noise transfer by maintaining annular spacing
    • Interlocking base capability assists with layout alignment
    • A variety of accessories are available
    • UL 50 Pa Ratings

  • Telescoping-Sleeves

    • UL Listed sleeves, when installed per UL Systems
    • Firestopping provided by additional HoldRite Firestop Products sold separately (no intumescent material included), can achieve 2 or 3-hour F-Ratings
    • Telescoping design adjusts from 7-1/2” to 11-3/4”, in 1/4” increments.
    • Cut to as short as 4-1/2”.
    • Available for 1/2” to 6” penetrants – piping, etc.
    • For insulated and non-insulated pipes
    • Fast, simple concrete sleeve for flat form decks
    • Includes locator whiskers, to locate buried sleeves
    • Dimensions on sleeve allows for simple height adjustment when cutting
    • Safety caps meet OSHA hole cover requirements
    • No field assembly required
    • Sleeve remains in slab, unlike typical hollow sleeves
    • Accepts HOLDRITE HydroFlame Pro Series Corrugated Metal Deck Plate, for corrugated deck forms
    • Extensions are available for slabs over 12”
    • A variety of accessories are available

  • Sleeves-w-Adjustable-Cap

    • UL Listed sleeves, when installed per UL systems
    • Firestopping provided by additional HoldRite Firestop Products sold separately (no intumescent material included), can achieve 2 or 3-hour F-Ratings
    • 7-1/4” to 8” tall with adjustable cap
    • Non-telescoping design. Cut to as short as 4-1/2”.
    • Available for 1/2” to 6” penetrants – piping, etc.
    • For insulated and non-insulated pipes
    • Fast, simple concrete sleeve for flat form decks
    • Includes locator whiskers, to locate buried sleeves
    • Dimensions on sleeve allows for simple height adjustment when cutting
    • Safety caps meet OSHA hole cover requirements
    • No field assembly required
    • Sleeve remains in slab, unlike typical hollow sleeves
    • Accepts HOLDRITE HydroFlame Pro Series Corrugated Metal Deck Plate, for corrugated deck forms
    • Extensions are available
    • A variety of accessories are available

  • Deck Plate

    The HOLDRITE® Hydroflame "Corrugated Metal Deck Plates" transition cast-in-place firestop sleeving devices from use on a flat form deck into a sleeve for use on a corrugated metal form deck. Available for all Pro Series Sleeve sizes. Steel plate snaps onto the Base of the sleeve securely. (#8 screws can be be added for increased strength)

  • Extension Sleeve

    • Extends the height of HOLDRITE HydroFlame Pro Series sleeves by as much as 4-3/4" in 1/4” increments
    • No coupling needed for connection to sleeves
    • Ideal for use on concrete pours over 12”
    • Available for all HOLDRITE HydroFlame Pro Series sleeve sizes
    • Connects to safety caps, water dams, water modules and underside of sleeves

  • Water Module

    • Provides added water protection for HOLDRITE HydroFlame Pro Series Sleeves
    • Prevents debris from falling into annular space around piping
    • Pre-installed prior to concrete pour
    • Available for all HOLDRITE HydroFlame Pro Series Sleeve sizes
    • Adds 1/2” to the overall height of pro series sleeves
    • Accepts safety cap and other HOLDRITE HydroFlame Pro Series accessories
    • UL W-Rated seal, water-tight for most penetrants

  • Water Dam

    The HOLDRITE® Hydroflame Pro Series "Water Dam" attaches to the top of the Pro Series cast-in-place firestop sleeves and adds a 2" tall water dam barrier at the perimeter of the sleeve opening. Sizes are available to fit all Pro Series Sleeves, for all sizes of penetrants 1/4" thru 6" nominal size. Thread sealant may be added to male threads prior to installation, if desired. UL-Listed accessory when used with HOLDRITE's Hydroflame Pro Series Sleeves.

  • Tub Box

    Tub Boxes

    (15)

    • UL Listed firestop device for bathtub drains
    • 3 hour F-Rating
    • Built-in fire, smoke and gas protection
    • Provides a water tight slab penetration
    • Accepts 1-1/2” Plastic or Metallic drains
    • Allows for expansion, contraction and movement
    • UL W-Rated water seal
    • Height can be modified in the field
    • Available with 2" (3" ID) or 3" (4" ID) floor sleeve
    • Sleeve Extensions available for thick floor slabs

  • Aerator Adapter

    • Provides a recess in the underside of the concrete floor, for fitting access
    • Available for use with 2”, 3”, 4” & 6” HOLDRITE HydroFlame Pro Series Sleeve
    • For use in concrete floors as thin as 5-1/2”
    • Ideal for Sovent and other high and tight fitting joint access

  • Drain Sleeve

    • UL Listed firestop device – 3 hour F-Rating
    • For 2” shower/floor drains (Drain Not Included)
    • Allows for a recessed drain body in shower pans and shower stalls
    • Accepts plastic drain piping
    • Adjustable height sleeve – up to 14 3/4” slab height
    • Extensions available

  • Iron Drain Sleeve

    • UL Listed firestop device
    • For no-hub cast iron drains and piping
    • Mount drain body on top of sleeve and secure to deck
    • For cast-in-place drains (Drain Not Included)
    • For Neo-Lock style drain outlets
    • Extensions available

  • Cable Sleeve

    • UL Listed firestop device – 2-3 hour F-Rating
    • Accepts multiple data, phone, electrical cables, fiber cables, coax, refrigeration line-sets
    • Accepts cable fill up to 45%
    • Accepts multiple tubing-water lines, etc.
    • Some models are height adjustable
    • Extensions also available

  • Flange Sleeve

    • UL Listed firestop device – 3 hour F-Rating
    • Models for 3” or 4” toilet flanges (Flanges Not Included)
    • For both plastic and no-hub cast iron drain piping
    • Mid-body seal provides water-tight penetration
    • Adjustable height sleeve up to 12”
    • Extensions are available for slabs over 12”

  • hf-m10-1

    • UL Listed Firestop Devices
    • For use with Plastic, Metallic, and Insulated Metallic penetrants from 8” to 12” in diameter
    • Tested in concrete slabs up to 3 Hour F Rating (for 6” and thicker slabs)
    • Safety caps meet OSHA hole cover requirements
    • L Ratings and W Ratings available. W Ratings achievable using sealants
    • Sleeves are built 8” tall, but can be cut as short as 6”
    • Extensions available in 1” high increments to match slab thicknesses
    • Extensions can be added to create a 2” water dam after concrete pour
    • Extensions/Water Dam can support weight of a riser clamp
    • Hollow Sleeves Available for use with traditional firestop sealants

  • HoldRite-Sleeve-Extension-Adjustable-Cap
  • HoldRite-Pro-Electrical-Firestop

    The HOLDRITE® Hydroflame Pro Electrical Firestop Sleeve Series System consists of UL & cUL listed assemblies that provide sleeving & firestop solutions for cast-in-place concrete floors. These sleeve products provide solutions for both metallic & non-metallic electrical conduits as well as power and data cables and cable bundles. For slabs 2 ½" and thicker and for pipes, conduits & cables ½" - 6" nominal; 2 & 3 hour UL Fire Ratings and T, L & W- ratings available. 50 Pa ratings available. See UL Fire Resistive Directory (R25101) for further details. Sleeves are easly adapted for use on Corrugated Metal Decking with the use of HoldRite's CD Plates. 24 model numbers include: #HFP-G1 (B), #HFP-G2 (B), #HFP-G3 (B), #HFP-G4 (B), #HFP-G5 (B) and #HFP-G6 (B).

    Tested to ASTM E90 standard test method for laboratory Measurement of Airborne Sound Transmission Loss in Building Partitions and Elements. Please see HOLDRITE Silencer Series brochure or appropriate testing reports for further information. Contact your HOLDRITE representative for any additional information.