The HOLDRITE® #115 and #115-C (Copper-Bonded™) are steel brackets designed to position water supply lines off the vent or waste pipe in chase walls. Supports 1/2" through 2" pipes both vertically and horizontally. Packaged with self-locking stainless steel band, screws, metal clamps, and self-adhesive isolating felt. Excellent for pre-fab applications. Supports piping prior to wall framing. Heat the pipe, not the bracket when soldering the #115-C version.

The HOLDRITE® Copper-Bonded™ bracket designed to support 1/2" and 3/4" tubing. This bracket mounts directly onto a horizontal or vertical pipe. It is designed to position water supplies for lavatories and other fixtures and is ideal as a mid span support within a 2-1/2" or wider wall. Packaged with a self-locking 2" stainless steel band and self-adhesive isolation felt. When used for copper tubing, solder directly to the bracket. Heat the tubing, not the bracket.

The HOLDRITE #110-S-1/2 is a Copper-Bonded™ and available with 1/2" notches on 1" centers. This bracket mounts directly onto a horizontal or vertical pipe and is designed to position water supplies for lavatories and other fixtures. Packaged with a self-locking 4" stainless steel band and self-adhesive isolation felt; solder the pipes directly to the #110-S to set 4", 6" and 8" centers. Heat the pipe, not the bracket.

The HOLDRITE #111-S is a Copper-Bonded™ and supports both 1/2" and 3/4" pipes. Designed to fit within a 3-1/2" wall. The #111-S positions water supplies for lavatories and other fixtures. Mount the #111-S to the vertical vent or waste pipe with the self-locking 4" stainless steel band using the isolating felt and solder your pipes to the bracket. The 1/2" notches provide 4", 6" or 8" centers, while the 3/4" notches provide 4" or 8" centers. When soldering, heat the pipe, not the bracket.

The HOLDRITE® #V-2 is a Copper-Bonded™ steel bracket designed to saddle horizontal water headers, with a load rating of 250 pounds, in tubing sizes ranging from 1/2" trough 3". The #V-2 comes pre-assembled with isolating felt and a 5" self-locking stainless steel band attached. Ideal for pre-fab installations. Simply attach the #V-2 to adjacent surface or piping and position the horizontal water header. Solder the tubing to the #V-2 bracket. Heat the pipe, not the bracket.

Positions and secures water closet supply above floor. Copper-Bonded™ heavy duty 16 gage reinforced bracket with horizontal mounting base and fastener holes. Mounts to top or face of base plate/mud sill, or under plate directly to floor. Positions and solders 1/2" CTS copper at heights up to 9". Features vertical pattern of 6 pipe holes (5 extruded): 4 on 1" centers from 6" to 9" high, plus holes at 4-1/2" and 2-3/4". Works with single or double floor plate. When soldering, heat the pipe, not the bracket.